What We Do
Our Services
End-to-end risk, safety and engineering support for the energy and industrial sectors, organized into four practice areas.
FERA
Fire and Explosion Risk Analysis
Assessment of fire and explosion scenarios and their impact on people, assets and facility layout.
QRA
Quantitative Risk Assessment
Numerical modelling of risk against recognised industry criteria.
OBRA
Occupied Building Risk Assessment
Evaluation of fire, blast and toxic hazards affecting occupied buildings on site.
Smoke & Toxic Gas Dispersion
Smoke and Toxic Gas Dispersion Analysis
Modelling of how smoke and toxic releases spread and their effect on personnel and surroundings.
Flare Study
Flare Heat & Dispersion Study
Assessment of flare radiation levels and gas dispersion to confirm safe zones and limits.
Noise Studies
Noise Modeling, Mapping and Control Studies
Prediction and mapping of noise levels with practical control measures to meet limits.
Fire Proofing
Passive Fire Protection – Fire Proofing Engineering
Engineering of passive fire protection to maintain structural and equipment integrity during fires.
F&G Mapping
Fire and Gas Mapping (2D and 3D)
Detector coverage mapping to optimise fire and gas detection placement in 2D and 3D.
Layout & Siting
Layout Safe Distance and Equipment Siting Assessment
Review of safe separation distances and equipment placement within the facility layout.
HAC
Hazardous Area Classification and Schedule Development
Classification of hazardous zones and preparation of the equipment schedule for those areas.
DSEAR
Dangerous Substances and Explosive Atmospheres Regulations Assessment
Risk assessment of dangerous substances and explosive atmospheres in line with DSEAR requirements.
CFD Modeling
Consequence Modeling using Computational Fluid Dynamics
Detailed simulation of gas dispersion, fire and explosion effects in complex geometries.
Dust Explosion
Dust Explosion Consequence Analysis
Evaluation of combustible dust hazards and the consequences of dust explosions.
Bowtie
Bowtie Analysis and Visualization
Visual mapping of threats, barriers and consequences around a major hazard event.
MHIR
Major Hazard Identification Register (MAH)
A register of major accident hazards and their key controls across the facility.
SCE
Safety-Critical Equipment Identification and Categorization
Identification and categorisation of equipment critical to preventing or mitigating major accidents.
Performance Standards
Performance Standard Development (PS)
Definition of functionality, availability and reliability criteria for safety-critical elements.
Safety Case
Safety Case Development – HSE Safety Case
Preparation of a structured safety case demonstrating that major hazards are controlled.
HAZOP
Hazard and Operability Study
Systematic examination of process deviations and their safety implications.
HAZID / ENVID / OHID
HAZID-ENVID-OHID Studies including Checklist / What-If
Early-stage identification of safety, environmental and occupational health hazards using structured techniques.
ALARP
ALARP Demonstration Study
Demonstration that risks are reduced as low as reasonably practicable.
LOPA
Layer of Protection Analysis for SIL Determination
Semi-quantitative assessment of protection layers to determine required SIL targets.
PSM Gap Analysis
Process Safety Management Gap Analysis – Audit
Audit of process safety management practices against standards to identify gaps and improvements.
MOPO
Matrix of Permitted Operations Assessment
Definition of which activities may run together safely under different operating conditions.
SIMOPS
Simultaneous Operations Assessment
Assessment of risks arising when multiple activities take place at the same time and location.
ERP
Emergency Response Plan Development
Development of clear plans and responsibilities for responding to emergencies.
EAEA
Emergency Access and Egress Assessment
Review of access and egress routes for emergency responders and personnel.
EERA
Escape, Evacuation and Rescue Assessment
Evaluation of escape, evacuation and rescue arrangements under credible emergency scenarios.
MOC
Establishing Management of Change
Setting up a controlled process to manage technical and organisational changes safely.
Ignition Source Assessment
Ignition Source Risk Assessment (Mechanical / Electrical)
Identification and control of mechanical and electrical ignition sources in hazardous areas.
ESSA
Emergency System Survivability Assessment
Verification that emergency systems remain functional during and after a major accident.
COSHH
Control of Substances Hazardous to Health Assessment
Assessment of health risks from hazardous substances and the controls needed to protect workers.
HAZMAT
Hazardous Material Assessment Study
Evaluation of the hazards of materials handled, stored and transported on site.
Ship Collision
Ship Collision Study
Analysis of collision likelihood and consequences between vessels and offshore or marine facilities.
Ship Impact
Ship Impact Assessment
Assessment of structural effects and damage resulting from vessel impact.
Dropped Object
Dropped Object Study
Evaluation of dropped object risks to equipment, structures and personnel from lifting operations.
Process Safety (PS) Consultancy
Managing major accident hazards across the asset lifecycle.
Loss Prevention (LP) Consultancy
Practical strategies that protect people, assets and continuity of operations.
Compliance & Regulatory Support
API, NFPA, OSHA, IEC alignment
Guidance through local and international regulatory requirements.
Design and Consulting
Engineering design support integrated with safety from the earliest stages.
Training
Technical and safety training that builds lasting risk-management capability.
Kenexis Integrated Safety Suite
Process safety engineering software
A complete set of tools for hazard analysis, SIS lifecycle, risk analysis and fire and gas mapping. ENTECH supplies, licenses and supports the full Kenexis software portfolio in Egypt.
- 9 software modulesUse individually or in any combination
- Cloud-basedRuns in the browser, no desktop install
- One platformShared data across PHA, SIS and F&G work
- Training includedIntegrated software training modules
Software modules
Everything in the Kenexis portfolio, available through ENTECH.
Kenexis Fire & Gas Mapping
Formerly Effigy
Performance-based placement and verification of fire, flammable gas, toxic gas, gas cloud imaging and ultrasonic detectors. Based on ISA-TR84.00.07, with 3D CAD import and patented plume modelling.
Kenexis Open-PHA
HAZOP and LOPA
Process hazard analysis, HAZOP and LOPA studies in one tool.
Kenexis SIS
SIS lifecycle and SIL verification
SIL verification, safety requirement specifications and SIS performance tracking.
Kenexis Fault Tree
Fault tree analysis
Build fault trees for complex SIL verification and reliability work.
Kenexis Bowtie
Quantitative bowtie analysis
Link hazards, causes, barriers and consequences in one view.
Kenexis MOC
Management of change
One auditable workflow from proposal to closure, next to your PHA and SIS data.
Kenexis Consequence Modeling
Powered by CANARY by Quest
Thermodynamic calculations and fluid release simulations.
Kenexis Open-Audit
Validation and auditing
Validate and audit your safety studies and records.
Kenexis API
Application programming interface
Connect Kenexis data to your own systems.
What ENTECH offers
From choosing the right modules to delivering the final study.
Software Sales & Licensing
Full Kenexis portfolio
Quotations, licences and renewals for any module, handled locally by ENTECH.
Studies Using Kenexis Tools
Consultancy
Fire and gas mapping, HAZOP, LOPA and SIL studies delivered by our engineers.
Support & Training
For your team
Technical support and user guidance to get your engineers productive quickly.
Not sure which modules you need?
Tell us about your project and we will recommend the right combination.